How Do I Register An Ocx File In Windows 10 64 Bit?

Annals or Unregister ActiveX DLL or OCX Files

Sometimes "application extension" files (.DLL or .OCX) must be manually registered to properly support functions in a program such as CTI Navigator. A variety of ActiveX, Automation, or "Run-fourth dimension" type errors can effect when associated application extension files (too called ActiveX controls) are not registered in Windows for use past the requesting plan.

Click on the appropriate topic in the list below to go directly to information relevant to that topic:

Annals dll or ocx file in Windows Vista, seven, viii.i, or 10
Annals dll or ocx file in Windows XP (or before Windows)
Un-register dll or ocx files
Security and Active X Controls
- Enable ActiveX Specifically for CTI Navigator

To register an ActiveX control (dll or ocx) file in Windows Vista, seven, viii.1 or 10:

Open the Windows Control Prompt
- in Windows Vista or 7 :
  - Select Kickoff > All Programs > Accessories
  - Right-click on "Command Prompt" in the Accessories
  - Click " Run as Administrator "
- in Windows 8.1:
  - Open the "Quick Link" menu (by holding down the Windows viii logo primal and pressing the 10 key)
  - Select "Command Prompt (Admin)"
  - Select "Yes" to permit changes
- in Windows 10 :
  - Right-click on the Start icon
  - Select "Control Prompt (Admin)"
To register a dll or ocx Windows System file in a 32-bit version (older) of Windows (Vista, 7, viii.1, or 10),
- Type cd\ [then press Enter]
- Go to step 5 below
To register a 32-bit dll or ocx Windows System file in a 64-chip version of Windows (ten, 8.i, 7, or Vista),
- Type cd \Windows\SysWOW64 [then press Enter] {run across note 1 below}
- Become to step v beneath
To register a dll file in CTI Navigator
- in a 32-scrap version of Windows, type cd\Program Files\Cti Navigator [so press Enter]
- in a 64-bit version of Windows, blazon cd\Programme Files (x86)\Cti Navigator [and so press Enter]
Type regSvr32 {fileName.dll} [or regSvr32 {fileName.ocx} every bit appropriate] - see notation 2 below
- For case,
  - to register the Microsoft "msi.dll" file in the Windows\System32 folder of a 32-bit version of Windows, type cd\ and press ENTER; then type regsvr32 msi.dll and press ENTER;
  - to register the Microsoft "ScrRun.dll" file in the Windows\SysWOW64 binder of a 64-scrap version of Windows, blazon cd \Windows\SysWOW64 and press ENTER; and then type regsvr32 scrrun.dll and press ENTER;
  - to register the CTIAnnouncement.dll file in the CTI Navigator folder in a 32-fleck version of Windows, type cd\Program Files\CTI Navigator and printing ENTER; then blazon regsvr32 ctiannouncement.dll and press ENTER;
  - to register the CTI Announcement.dll file in the CTI Navigator folder in a 64-scrap version of Windows, type cd\Programme Files (x86)\ CTI Navigator and press ENTER; then type regsvr32 ctiannouncement.dll and press ENTER.
A message indicating "DllRegisterServer in... succeeded" should announced.

Note 1: In a 64-fleck version of Windows, 32-bit versions of Windows arrangement files and DLL libraries (such as used by CTI Navigator) are in the "Windows\SysWOW64" folder, and 64-chip versions of Windows arrangement files and DLL libraries are in the "Windows\System32" folder. In a 32-scrap version of Windows, the Windows organisation files and DLLs are in the "Windows\System32" binder (and there is no SysWOW64 folder).

Note two: Substitute the name of the file to be registered for "fileName" and do not type the {} braces. Also, place one space between regsvr32 and the fileName. Meet format used in examples.

Note 3: If y'all are using Windows Vista, yous can add a file to the Windows Vista registry that volition allow you to correct-click on any DLL file and simply select Register or Unregister (without going through the detailed commands). To add the Register and Unregister control to your right-click menu, become to www.ctimls.com/Downloads/Windows/Vista/VistaDll.reg > click Salvage > right-click on the saved file in your Vista > select Merge > accept the registry change notice. To also add a file to the Windows Vista registry that will allow you to right-click on any OCX file to register or unregister it, go to www.ctimls.com/Downloads/Windows/Vista/VistaOcx.reg > click Salvage > right-click on the saved file in your Vista > select Merge > have the registry change notice. Warning : Earlier making whatever registry changes, Microsoft highly recommends that yous brand a backup of your registry (see related commodity below).

▲ Dorsum to the height of this web page

In versions of Windows prior to Vista , or with User Account Control (UAC) turned off in Windows Vista, 7, or 8, ActiveX files (such as .dll or .ocx) tin be registered past double-clicking on the filename in Windows Explorer ("File Explorer" in Windows 8). If opening, running, or double-clicking on a file with a .dll extension (Dynamic Link Library) or an.ocx extension (OLE Control Eastwardxtension) brings up an "Open up With" screen: click "Select the plan from a List" and click OK > click the "Scan" (or "Other") push button on the lower right of the screen > progressively select directories and change the "Look-in" box on the next screen to C:\Windows\System32\regsvr32.exe > double-click on regsvr32.exe (or click the Open up button) > verify that "Microsoft Register Server" is highlighted in the Programs list > verify that a check marker is in the "Always Employ" box on the lower left of the Open With screen > click the OK push button on the "Open With" screen. A message should appear indicating that the registration succeeded. Click the OK button on the RegSvr32 message screen.

▲ Dorsum to the top of this web page

Sometimes files need to be un-registered and then re-registered to operate properly. To un-register a 32-flake Windows organization file and and then re-annals it in a version of Windows without User Account Control (prior to Vista) or with UAC turned off (in a 32-bit version of Windows Vista, 7, or eight):

Select Start > Run (or in Windows 8, seven or Vista press the Windows logo key + R key )
Blazon Regsvr32 /u {Filename.ocx} [There is 1 infinite both before and subsequently /u. Do not blazon the {} braces. Also come across note 4 below.]
Click the OK button. A message indicating DllUnited nationsregisterServer... succeeded will appear.
Then re-register the file by runningRegsvr32 {Filename.ocx or .dll} (as described in a higher place. Run into also annotation five below)

In a 64-bit version of Windows Vista, vii, or viii (see note ane above):

Select Offset > Run (or in Windows 8, seven or Vista printing the Windows logo fundamental + R key )
Type cd \Windows\SysWOW64 Regsvr32 /u {Filename.ocx} [In that location is ane space both earlier and after /u. Do not type the {} braces. Also see note 4 beneath.]
Click the OK button. A message indicating DllUnregisterServer... succeeded will appear.
Then re-register the file past runningcd \Windows\SysWOW64 Regsvr32 {Filename.ocx or .dll} (as described above. See likewise note 5 below)

Note 4: If regsvr32.exe is non in your Windows\Organisation32 binder, Browse to the Windows\System folder (in Windows 98), or use the Search function in Windows to observe the regsvr32.exe file.

Annotation 5: To register or unregister a file not in the Windows system folder using the Windows Run command, you must enter the full path to the file enclosed by quotation marks later the Regsvr32 or Regsvr32 /u control. For case, to register the Proclamation file in CTI Navigator run Regsvr32 " C:\Programme Files\Cti Navigator\CtiAnnouncement.dll" . Ensure that you lot blazon the correct drive letter and the correct folder (Programme Files or Plan Files (x86)) in the path.

Security and ActiveX Controls

ActiveX controls are non inherently unsafe when used appropriately by trusted developers (such equally Creative Applied science, Adobe, and Apple tree - see examples below). Problems can occur when Internet Explorer is set up to allow ActiveX controls to download and activate from whatsoever web page (including unknown and not-trusted sites). Some (not-trusted) web pages may contain undesirable or malicious ActiveX controls (such equally spyware or adware). To avoid accidentally downloading undesirable ActiveX controls, information technology is recommended that Internet Explorer exist configured to not install ActiveX controls from un-trusted sites.

To enable ActiveX specifically for CTI Navigator (regardless of settings for other websites):

Open the Windows Command Console (or in Internet Explorer select Tools)
Select Internet Options
Click the Security tab
Select Trusted Sites
Click Sites push button > united nations -check "Require server verification (httpsouthward:)... "
Click in the "Add this website to the zone" box and type ctimls.com
Click the Add together push button
Click the shut button.

Run into the related commodity " Configure Security settings in Windows ... " for additional instructions on setting ctimls.com as a Trusted site in Windows.

To restrict running possibly dangerous ActiveX controls in Internet Explorer:

Open Internet Options (in Windows Control Console or in Internet Explorer Tools)
Select the Security tab
Click the Custom Level push button
Disable "Download unsigned ActiveX controls"
Disable "Initialize & script ActiveX controls not marked as condom".

As long as the above restrictions are set in Internet Options, the following "Custom Level" Security settings are typically considered safe:

Enable " Run ActiveX controls and plug-ins"
Enable "Script ActiveX controls marked safe for scripting"
Prompt "Download signed ActiveX controls".

Example programs using trusted ActiveX controls: Adobe Reader, Apple tree QuickTime Player, CTI Navigator, Macromedia Flash Player, Microsoft Windows Media Player, Real Networks RealPlayer, Sun Java Virtual Machine.

▲ Back to the top of this spider web page