How To Register Xfinity Remote Control To Lg Smart Tv

To Pair an Xfinity Remote (With a Setup Button)

These instructions apply to the following remote models: XR11 (Voice Remote), XR5 and XR2.

1. Make sure the remote batteries are installed and your TV and Goggle box Box are powered on.
2. Set up the Tv set input to the input connected to the Xfinity Telly Box.
3. Press the Setup button on your remote until the LED at the top changes from cherry-red to green.
4. Press the xfinity button on the remote. The LED will begin flashing dark-green. (Annotation: When pairing an XR2 or XR5 remote to a DTA, you may need to press the xfinity push upwards to 5 times).
5. Follow the instructions by entering the iii-digit, on-screen pairing code.
   
   
6. Once the on-screen pairing code is correctly entered, your remote is paired with the TV Box.

Notation: If you do not see on-screen pairing instructions after pressing the xfinity button in step iv, press the xfinity button again. You may need to printing the xfinity button multiple times if there is more than 1 TV Box in range.

To Pair an Xfinity Voice Remote (Without a Setup Button)

Note: These instructions utilise to the XR15 Voice Remote (X1 or Flex).

1. Make sure the Voice Remote batteries are installed and your Goggle box and TV Box are powered on.
2. Set up the TV input to the input connected to the Xfinity TV Box.
3. Printing and hold the xfinity and Info buttons for five seconds. Wait for the Voice Remote light to change from red to green.
4. Follow the instructions past inbound the iii-digit, on-screen pairing code.
   
   
5. Once the on-screen pairing lawmaking is correctly entered, your Voice Remote is paired with the TV Box.
6. Once your Voice Remote is paired, follow the on-screen instructions to set upwardly power, volume and input command for your TV.
   • Annotation: While the Boob tube is on (TV Box must be activated first), you can too press and hold the xfinity and Mute buttons on the remote for five seconds until the light at the top changes from red to green, so follow the on-screen instructions to pair the Phonation Remote to control your Tv.

These instructions use to the XR16 Voice Remote (Flex merely, no number keys):

1. Plough on your streaming device and TV.
2. Remove the pull tab on the back of the remote to activate it.
3. Point the remote at your Boob tube and press the Microphone button.
4. Follow the instructions that come up on your Television to finish setting up.

How To Register Xfinity Remote Control To Lg Smart Tv,

Source: https://www.xfinity.com/support/articles/remote-program-the-xr2-or-xr5-to-aim-anywhere?view=app

Posted by: kelseyupolkinsuct.blogspot.com

Share this post